Tag: Visual edit |
(Replaced content with "== ==") Tag: Visual edit |
||
| Line 1: | Line 1: | ||
| − | == |
+ | == == |
| − | A photocatalytic reaction proceeds in the presence of light--typically visible or UV--and catalyst--often a semi-conductive transition metal oxide such as titanium dioxide (TiO<sub>2</sub>). This experiment will give an introduction into wastewater treatment via photocatalysis by measuring the degradation kinetics of methylene blue as a function of catalyst loading, hydrogen peroxide concentration, and experimental setup. |
||
| − | |||
| − | === Pre-Lab Questions === |
||
| − | You can download the Pre-Lab questions for this experiment [https://drive.google.com/file/d/0B3V_gwrTK6qGMXBJUFdXUy10czg/view?usp=sharing here]. |
||
| − | |||
| − | == Background == |
||
| − | Review your textbook on chemical reaction engineering, particularly those chapters which cover experimental determination of rate laws <ref>Fogler, H. ''Essentials of Chemical Reaction Engineering.'' Prentice Hall: Boston, 2011; Ch. 7.</ref> and heterogeneous catalysis <ref>''ibid,'' Ch. 10.</ref>. Most often, a pseudo first-order kinetic model is chosen to determine rate laws in this experiment but you should compare other models (particularly the Langmuir-Hinshelwood model) as well. |
||
| − | |||
| − | If you're not familiar with linear and non-linear regression then you should review these topics as well, either on the Statistics wiki (forthcoming) or in your textbooks. <ref>Fogler, H., ''Essentials of Chemical Reaction Engineering''; Pearson Education: Boston, 2011, Ch. 7.</ref> |
||
| − | |||
| − | == Theory == |
||
| − | Photocatalysis is such a large field that there are tens of thousands of papers to read; it's recommended that you give yourself a morning--and maybe and afternoon--to do so. If you're unwilling or unable to read everything, we've categorized a few favorites below to help you along. |
||
| − | |||
| − | === Review Articles === |
||
| − | These articles provide a good overview and context for the field but intentionally lack the specificity of research articles. |
||
| − | * Parameters affecting the photocatalytic degradation of dyes using TiO<sub>2</sub>-based photocatalysts: A review.<ref>Akpan, U.G.; Hameed, B.H. ''J. Hazard. Mater.,'' '''2009, '''''170'', 520-529.</ref> |
||
| − | * Photocatalytic degradation for environmental applications - a review<ref>Bhatkhande, D.S.; Pangarka, V.G.; Beenackers, A. ''J. Chem. Technol. Biotechnol.,'' '''2001,''' ''77'', 102-116.</ref> (good coverage of environmental aspects). |
||
| − | * Titanium dioxide photocatalysis<ref>Fujishima, A.; Rao, A.N.; Tryk, D.A. ''J. Photochem. Photobiol C: Photochem. Reviews,'' '''2000,''' ''1'', 1-21.</ref> (good physical chemistry aspects). |
||
| − | * Heterogeneous photocatalytic degradation of organic contaminants over titanium dioxide: A review of fundamentals, progress, and problems.<ref>Gaya, U.I.; Abdullah, A.H. ''J. Photochem. Photobiol. C: Photochem. Reviews,'' '''2008,''' ''9'', 1-12.</ref> |
||
| − | * Tailored titanium dioxide photocatalysts for the degradation of organic dyes in wastewater treatment: A review<ref>Han, F.; Kambala, V.; Srinivasan, M.; Rajarathnma, D.; Naidu, R. ''Appl. Cat. A: General,'' '''2009,''' ''359'', 25-40.</ref> (a broad review which includes much nano-TiO<sub>2</sub>). |
||
| − | * Treatment of hazardous organic and inorganc compounds through aqueous-phase photocatalysis: A review.<ref>Kabra, K.; Chaudhary, R.; Sawhney, R.L. ''Ind. Eng. Chem. Res.,'' '''2004,''' ''43'', 7683-7696.</ref> |
||
| − | * Photophysical, photochemical and photocatalytic aspects of metal nanoparticles (good review from a quality journal).<ref>Kamat, P.V. ''J. Phys. Chem. B, '''''2002,''' ''106'', 7729-7744.</ref> |
||
| − | * Photocatalysis on TiO<sub>2</sub> surfaces: Principles, mechanisms, and selected results<ref>Linsebigler, A.L.; Lu, G.; Yates Jr., J.T. ''Chem. Rev.,'' '''1995,''' ''95'', 735-758.</ref> (classic review with over a thousand citations. You can find the crystal structure of various titanium oxides here). |
||
| − | |||
| − | === Research Articles: Slurry Reactors === |
||
| − | These articles were chosen for their investigation of dye degradation in slurry reactors. Note that nanometer-sized TiO<sub>2</sub> particles are used very differently from the micron-sized particles we use in the lab, and that only a small number of studies use them in a slurry as we do. We found that nanometer-sized particles were a poor choice for a teaching lab due to safety concerns. |
||
| − | * Photocatalytic degradation pathway of methylene blue in water.<ref>Houas, A.; Lachheb, H.; Ksibi, M.; Elaloui, E.; Guillard, C.; Herrmann, J.M. ''Appl. Catal. B: Environ.,'' '''2001,''' ''31'', 145-157.</ref> |
||
| − | * TiO<sub>2</sub>-assisted photocatalytic degradation of azo dyes in aqueous solution: kinetic and mechanistic investigations.<ref>Konstantinou, I.K.; Albanis, T.A. ''Appl. Catal. B: Environ.,''''' 2004,''' ''49'', 1-14.</ref> |
||
| − | * Photocatalytic degradation of various types of dyes in water by UV-irradiated titania. <ref>Lachheb, H.; Puzenat, E.; Houas, H.; Ksibi, K.; Elaloui, E.; Guillard, C.; Herrmann, J.M. ''Appl. Catal. B: Environ., '''''2002,''' ''39'', 75-90.</ref> |
||
| − | * Kinetics of photocatalytic degradation of reactive dyes in a TiO<sub>2</sub> slurry reactor.<ref>Sauer, T.; Cesconeto Neto, G.; Jose, H.J.; Moreira, R.F.P.M. ''J. Photochem. Photobiol. A: Chem., '''''2002, '''''149'', 147-154.</ref> |
||
| − | * Photocatalytic degradation of various dyes by combustion synthesized nano anatase TiO<sub>2</sub>. <ref>Sivalingam, G.; Nagaveni, K.; Hegde, M.S.; Madras, G. ''Appl. Catal. B: Environ., '''''2003, '''''45'', 23-38.</ref> |
||
| − | * Variation of Langmuir absorption constant determined for TiO<sub>2</sub>-photocatalyzed degradation of acetophenone under different light intensity.<ref>Xu, Y.; Langford, C.H. ''J. Photochem. A: Chem.,''''' 2000, '''''133'', 67-71.</ref> |
||
| − | * Adsorption of methylene blue and acid blue 40 on titania from aqueous solution.<ref>Fetterolf, M.L.; Patel, H.V.; Jennings, J.M. ''J. Chem. Eng., '''''2003, '''''48'', 831-835.</ref> |
||
| − | * Photodestruction and COD removal of toxic dye erioglaucine by TiO<sub>2</sub>-UV process: influence of operation parameters.<ref>Jain, R.; Sikarwar, S. ''Int. J. Phys. Sci.,''''' 2008,''' ''3'', 299-305.</ref> |
||
| − | * A general treatment and classification of the solute absorption isotherm.<ref>Giles, C.H.; D'Silva, A.P.; Easton, I.A. ''J. Coll. Intf. Sci., '''''1973,''' ''47'', 766-778.</ref> |
||
| − | |||
| − | === Research Articles: H<sub>2</sub>O<sub>2</sub>/TiO<sub>2</sub> Systems === |
||
| − | These articles were chosen for their use of H<sub>2</sub>O<sub>2</sub> and TiO<sub>2</sub> for dye degradation. Note that some are written in a manner similar to our lab reports but occasionally employ poor writing styles. |
||
| − | * Photocatalytic degradation of disperse blue 1 using UV/TiO<sub>2</sub>/H<sub>2</sub>O<sub>2</sub> process.<ref>Saquiba, M.; Abu Tariqa, M.; Haquea, M.M.; Muneer, M. ''J. Environ. Mgmt. '''''2008,''' ''88'', 300-306.</ref> Note that this is not a great journal, the writing isn't that great, and the H<sub>2</sub>O<sub>2</sub> concentration was never stated. The mechanism is good compared to the next two references but still not complete; look in one of the previous references for the full mechanism. |
||
| − | * Treatment of Remazol brilliant blue dye effluent by advanced photo oxidation process in TiO<sub>2</sub>/UV and H<sub>2</sub>O<sub>2</sub>/UV reactors.<ref>Verma, M.; Ghaly, A.E. ''Am. J. Eng. Appl. Sci.,''''' 2008,''' ''1'', 230-240.</ref> |
||
| − | * H<sub>2</sub>O<sub>2</sub>/TiO<sub>2</sub> photocatalytic oxidation of metol. Identification of intermediates and reaction pathways.<ref>Aceituno, M.; Stalikas, C.D.; Lunar, L.; Rubio, S.; Perez-Bendito, D. ''Water. Res.,''''' 2002,''' ''36'', 3582-3592.</ref> |
||
| − | |||
| − | == Standard Operating Procedure == |
||
| − | |||
| − | === Safety === |
||
| − | * Lab coats and protective eyewear should be worn at all times. |
||
| − | * Dispose of broken glassware in the appropriately labeled receptacles; used filters can be disposed of in the trash. |
||
| − | * Do not dispose of waste down the drain! Use a flask to collect all waste then notify the TA or instructor at the end of the lab period. |
||
| − | * Methylene blue is a potent textile dye. When connecting tubing or transferring liquid, take caution not to splash. |
||
| − | * Relevant chemical information has been listed in Table 1. |
||
| − | {| class="article-table" align="center" style="background-color: white;" |
||
| − | |+ style="text-align: left; font-weight: normal" |'''Table 1.''' Chemicals and their formulas, hazards, and suppliers for UV photocatalysis. |
||
| − | |- |
||
| − | !Name<sup>MSDS</sup> |
||
| − | !Formula |
||
| − | !Hazard |
||
| − | !Supplier |
||
| − | !SKU |
||
| − | |- |
||
| − | |[http://www.sciencelab.com/msds.php?msdsId=9926051 Methylene blue] |
||
| − | |C<sub>16</sub>H<sub>18</sub>N<sub>3</sub>SCl |
||
| − | |[[File:hazCholesterol.png|60px]] |
||
| − | |unk |
||
| − | |unk |
||
| − | |- |
||
| − | |Hydrogen |
||
| − | [http://www.sciencelab.com/msds.php?msdsId=9925970 peroxide (5%)] |
||
| − | |H<sub>2</sub>O<sub>2</sub> |
||
| − | |[[File:hazHydrogenPeroxide5.png|60px]] |
||
| − | |any |
||
| − | |any |
||
| − | |- |
||
| − | |[http://www.sciencelab.com/msds.php?msdsId=9925268 Titanium dioxide] |
||
| − | |TiO<sub>2</sub> |
||
| − | |[[File:hazTitaniumDioxide.png|60px]] |
||
| − | |unk |
||
| − | |unk |
||
| − | |} |
||
| − | |||
| − | === Tutorial Video === |
||
| − | Check out the video below for a brief overview of this experiment, then carefully read the instructions below. Keep in mind that '''there may be variations '''in the equipment or protocol when you're in the lab compared to when this video was created. Ask a TA or the instructor if you're not clear on something. |
||
| − | [[File:UV Photocatalysis|centre|thumb|446x446px]] |
||
| − | |||
| − | === Preparation === |
||
| − | # Familiarize yourself with the Vernier SpectroVis, the Genesys 10S UV-Vis, and the data acquisition software. Note that there are two types of measurements to choose when using the software: |
||
| − | ## Absorption spectrum. Use this to determine the wavelength of maximum absorbance. |
||
| − | ## Point measurement. Use this to measure absorbance at a single, pre-set wavelength. |
||
| − | |||
| − | # Create a calibration curve. If you have done it right the first time, you only have to do it once. |
||
| − | ## Prepare about 100 mL of a solution of known dye concentration; typically 10 ppm is sufficient. |
||
| − | ## Acquire the absorption spectrum of this solution. If you see a plateau instead of peaks then the solution is too concentrated and needs to be diluted. |
||
| − | ## Note the wavelength of maximum absorbance, \(\lambda_{\textrm{max<nowiki>}}</nowiki>\). |
||
| − | ## Measure absorbance at \(\lambda_{\textrm{max<nowiki>}}</nowiki>\) for several diluted solutions, including deionized (DI) water. Minimize waste by using measurement pipets, plastic cuvettes and a [http://scienceprimer.com/serial-dilution serial dilution procedure]. |
||
| − | # Measure the volume of the reactor-flask system. |
||
| − | ## Select a small or medium-sized [http://www.thomassci.com/_resources/_global/media/resized/00003/ihwx.f14b883f-2d26-4e13-ba4b-31d1cc89e453.500.500.jpg glass spinner flask]. |
||
| − | ## Place the flask on the stir plate and connect the pump lines. |
||
| − | ## Fill the flask with enough DI water to submerge the appropriate pump line. |
||
| − | ## Run the peristaltic pump until continuous circulation is achieved between the flask and [http://www.thatpetplace.com/257409n.jpg UV reactor], adding water as necessary to keep the appropriate pump line submerged. Flow through the UV reactor should be from bottom to top. |
||
| − | ## The total volume of water used in Steps 3 and 5 is the volume of water you should use to prepare solutions for subsequent runs. |
||
| − | ## Drain the system. Use a large glass spinner flask or other appropriate glass flask to store your waste. '''Do not''' dump waste down the drain. |
||
| − | |||
| − | === Basic Operation === |
||
| − | # In the spinner flask, prepare an appropriate volume of solution of known (measured) dye concentration (~10 ppm). Use the stir plate to thoroughly mix the dye. '''Please note''' - the UV Sterilizer is packed with TiO<sub>2</sub> pellets. |
||
| − | # Add H<sub>2</sub>O<sub>2</sub> (5 mL) to "kick-start" [http://lmgtfy.com/?q=methylene+blue+degradation+reaction the reaction] . |
||
| − | # Turn on the pump (set to '''forward '''and set speed to '''3 or 4'''), stirrer, and UV reactor. |
||
| − | # At regular intervals, collect a sample, '''filter out any the TiO<sub>2</sub>'''<sub> </sub> '''residue '''by utilizing the centrifuge, and measure absorbance at the \(\lambda_{\textrm{max<nowiki>}}</nowiki>\) using the Genesys 10S UV-Vis. |
||
| − | ## Absorbance measurements are meaningless unless the sample is adequately filtered. |
||
| − | ## Make sure to keep the centrifuge balanced by setting two samples directly across from each other. |
||
| − | ## Each centrifuge tube have hold about 2 mL which should be enough to fill one cuvette. |
||
| − | ## Don't forget to set the \(\lambda_{\textrm{max<nowiki>}}</nowiki>\) on the UV-Vis. |
||
| − | |||
| − | === Shutdown === |
||
| − | # Turn off the UV reactor. |
||
| − | # Consolidate waste into a single, spinner flask. |
||
| − | ## If more waste was produced than can fit in a single flask, then fill a single flask and place excess waste in another glass container; the latter need not be a spinner flask. |
||
| − | # Add about 5 mL H<sub>2</sub>O<sub>2</sub>, then pump it through the UV reactor. |
||
| − | # Before you leave the lab, ask the TA or Instructor for instructions on how to handle the waste. |
||
| − | |||
| − | == Common Report Mistakes and Suggestions == |
||
| − | The evaluator(s) for this experiment was asked to list three or more common mistakes often made on the reports for this experiment, or to provide three or more suggestions that could improve the quality of reports for this experiment. The responses were as follows: |
||
| − | # small font size in the figures |
||
| − | # incomplete citations |
||
| − | |||
| − | == References == |
||
| − | <references /> |
||
19
pages